Standard fusion bonded epoxy powder for single layer pipe coating system.

Rapid cure speed and short cure time, high application efficiency

Excellent mechanical property

Excellent anti-corrosive property

Suitable used as heavy duty coatings for oil and gas pipelines

Fufills SY/T 0315-97 and CAN/CSA-Z245.20-98

Color: Green (standard),Other color is available on request.

Appearance: Uniform powder without any hard lumps.

Density:(25℃):1.3-1.5g/cm³

Gel time(230℃):8-30s

Cure time(230℃):1.5min

30kg(paper box with plastic inner bag)

Surface clean: Blast up to ISO Sa 2.5 or above with anchor depth of 50-80μm

Pipe preheating:----electrical induction heating pipe to  230℃

（the temperature just for reference，the ideal condition based on the practical test）

Application method:40-120KV electrostatic spray

Recommended film thickness:350μm(normal grade)

                           450um(extra grade)

Shortest interval before quenching:90s(230℃)

Theoretical coverage: 0.504kg/m²(350μm)

                    0.648 kg/m²(450μm)

Coating repair: Patch mending with BH-100 solvent free epoxy coating. Rough the

surface of the repaired area before application.

Storage: The storage life of the powder is 12 months at 25℃,65% RH. Lower

temperatures and humidity are preferred and the temperatures should not

exceed 33℃.