Fusion bonded epoxy powder primer for three layer pipe coating system.

Longer gel time benefit for the fusion with adhesive

Excellent adherence and peel strength

Including rust inhibited pigments so excellent anti-corrosive property

Suitable used as heavy duty coatings for oil and gas pipelines

Fufills SY/T 0413-2002 and CAN/CSA-Z245.20-98

Color: Red (standard),Other color is available on request.

Appearance: Uniform powder without any hard lumps.

Density:(25℃):1.4-1.6g/cm³

Gel time(200℃):15-50s

Cure time(200℃):≤3min

30kg(paper box with plastic inner bag)

Surface clean: Blast up to ISO Sa 2.5 or above with anchor depth of 40-60μm

Pipe preheating:----electrical induction heating pipe to 180- 220℃

Application method:40-120KV electrostatic spray

Recommended film thickness:80-- 120μm

Shortest interval before quenching:90s(230℃)

Theoretical coverage: 0.148kg/m²(100μm)

Coating repair: Patch mending with BH-100 solvent free epoxy coating. Rough the

surface of the repaired area before application.

Storage: The storage life of the powder is 12 months at 25℃,65% RH.  Lower

temperatures and humidity are preferred and the temperatures should not  

exceed 33℃.